NoCutModulators.com
Where installing a Brake Light modulator gets easy!
The No Cut Brake Lamp Modulator
(currently for the 2008 Kawasaki Ninja 250R only)
Hey all, welcome to NoCutModulators.com. Currently, I only have modulators available for the 2008 Kawasaki Ninja 250R. It is possible that this unit fits the earlier versions of this bike, but I did not test it myself, so I cannot tell you that it does.
Below, you will find instructions for installation for Not Cut modulator, and ordering buttons to the right. Have any Questions? Send me an email at support@nocutmodulators.com
Options
This unit is manufactured using the trusted Rear-Alert brake lamp modulator. The wiring and plugs have been selected and custom fit to provide a 2-minute installation into the 2008 Ninja 250R. I have this exact unit installed on my bike, and feel much more comfortable knowing that traffic behind me will see me much better when I apply my brakes.
What does it do?
When your front or back brakes are applied, the modulator pulses your brake lamp for about 4 seconds. The lamp then stays on solid until you release the brakes. Re-applying the brakes causes the unit to pules the brake light an additional 4~5 seconds. Generally you get 7 or 8 pulses before the lamp stays on solid. Also, cutting the green wire doubles the flash time should you want your brake light to flash longer.
Why do I want one?
Other drivers behind you generally are concerned with their own safety. Sadly, a motorcyclist will not get the focus and safe action that drivers will provide for other vehicles, such as trucks and vans. Also, a motorcycle's brake light is much harder to see than the dual-light system that "cager" vehicles employ.
Why buy this one?
You can buy other Brake Lamp modulators, but you'll have to cut your stock brake wires to install almost any of them! This unit is plug-and-ride! You know you don't want to cut up your bike!!
My price is very low! Standard Rear Alert units, with wire splicing kits, cost around $19. If you spent the time doing the research, collecting and buying the pieces, figuring out the wiring, and installing the connectors, you'd find that you probably can't even come close to the value I am offering. Just buy it, plug it in, and ride!
My price is very low! Standard Rear Alert units, with wire splicing kits, cost around $19. If you spent the time doing the research, collecting and buying the pieces, figuring out the wiring, and installing the connectors, you'd find that you probably can't even come close to the value I am offering. Just buy it, plug it in, and ride!
Features:
- Unit is weatherproof
- Connections are securely soldered in place
- Dust boots on the plugs keep the dirt out
- Installation takes about 2 minutes!
- Removal takes about 2 minutes!
- Each unit is tested 100%
- 3-month 100% No-Defects Warranty!
- Comes with 2-sided tape already installed to keep the unit from moving or rattling.
- There is a perfect place in the Ninja 250R under seat where this unit seems to have been made to fit!
- To double the length of flash time, simply cut the green wire loop!
The unit:
Genuine Rear Alert Brand Modulator (sold with approval!)
2-minute Installation
Step 1: Locate brake wiring coupler.
Step 2: Connect the quick-install unit.
Step 3: Clean the area of application with Isopropyl Alcohol, and remove the backing from the tape.
Step 4: Position the unit as shown, and press the unit firmly down.
Step 5: Route the wiring as shown, or however you prefer.
Step 6: Replace seat and RIDE!
All units are warrantied through me for a period of 3 months. I will replace any defective unit, at my cost. I will reimburse the sender for return shipping costs as they are stated on the package when it arrives (up to $4.95). Upon receipt of a defective unit, a brand new unit will be dispatched at my cost immediately. I test every unit I sell, and do not anticipate any returns for defective units. The warranty is simply for your peace-of-mind.
If you buy this item and wish to return it as non-defective, I will reimburse the purchaser for the actual purchase cost, minus shipping and handling.